Chilled Mirror Dew Point Hygrometer

       Multifunctional, portable dew point humidity meter , especially designed for field use. Typically apply to dew point measurement of SF6gas.

Features: 

* Based on the principle of chilled mirror. 
* Accurate measurement is guaranteed. 
* The system is stable, No need to repeatedly calibrated. 
* A built in electronic sample gas flow monitor. 
* Use RS-232 data output to connect with PC.

Specification: 

DP29-40 is specifically designed for air dew point measurement. It is applicable to standard reference for electronic component durability , dew point control for firing furnaces, dew point control for fuel cell test system, etc.
DP29-SF6 is specially for the measurement of Sulfur Hexafluoride (SF6). 
DP29-60 is a standard type. It applies to standard reference for laboratory calibration, moisture control for ceramic firing furnaces, humidity control for thermo-hygrostat chamber. 

*Accuracy:≤±0.2°C，±1Digit 
*Repeatability:≤±0.1°C，±1Digit 
*Resolution:0.1°C 
*Default Output:USB 
*Optional Output:±10mv/°C (0°C= 0mv) or 4-20mA 
*Measurement Principle:Chilled Mirror 
*Refrigeration:Semiconductor Refrigeration 
*Inlet Flow:15~60L/h, Generally 30~40L/h 
*Inlet Pressure:10mbar~10bar (1kpa~1Mpa) 
*Response Time:2°C/Second (Maximum) 
*Pump:Optional Accessory 
*Mirror Check:Press the Mode Conversion Key to mirror check mode (‘CH’ on the display), and check manually 
*Instrument Check Press the Test Cooling Key, open the measurement probe, and check manually at mirror check mode. 
*Voltage:220VAC±10%，50/60HZ 
*Consumption:About 160 Watts 
*Temperature:0~50°C 
*Humidity:<90% , No Condensation 
*Weight:About 7.22kg 
*Dimension:342(W)x140(H)x326(D) mm 

Standard Accessories: 
1. Main Unit 
2. Inlet Tube (FEP，3m), With Connector 
3. Instruction Manual 
4. Packaging Box 

Optional Accessories: 
1. USB, RS-232 data cable with software