MEMS Current Type Acceleterometer
Features
----Three axis measurement optional (X,Y,Z)
----Output signal:4-20mA
----Voltage supply:9-36V
----Shock resistance:2000G
----Measuring range optional:±01G;±02G;±04G;±08G;±16G;±32G;±40G
----Excellent deviation stability
----Good environment performance shock,vibration and temperature
----Size:L47×W47×H38mm
----Weight:100g
----Working temperature:-40°C to +85°C
----Storage temperature:-55°C to +100°C
Application
----Crash records
----Fatigue monitoring and forecasting
----Traffic system monitoring
----The roadbed analysis and high-speed railway fault detection
----Military and civilian flight simulator
----The shipboard satellite tracking system
----Low frequency vibration and automatic monitoring
----Military and civilian flight simulator
----The shipboard satellite tracking system
----Low frequency vibration and automatic monitoring
art No: |
ACCE-10098-02 |
ACCE-10098-8 |
ACCE-10098-40 |
Unit |
Range |
+/-2 |
+/-8 |
+/-40 |
g |
Deviation Calibration |
<10 |
<50 |
<150 |
mg |
48h deviation Stability |
0.5 |
<1 |
<2 |
mg typecial value |
Measure Axis |
X, Y, Z |
X, Y, Z |
X, Y, Z |
|
Annual Deviation Stability |
1.5(<5) |
7.5(<25) |
22(<75) |
mg normal (max) |
Power on/off repeatability |
<2 |
<10 |
<20 |
mg(MX) |
Scale Factor Tem. coefficient |
100 |
100 |
100 |
ppm/ Cel. degree |
|
-50/250 |
-50/250 |
-50/250 |
Min/Max |
Deviation Temperature coefficient |
0.1 |
0.5 |
1.5 |
mg/℃(typical) |
|
+/-0.4 |
+/-2 |
+/-6 |
mg/℃(Max) |
Resolution/threshold(@1Hz) |
<1 |
<5 |
<15 |
mg(max) |
Annual Scale Factor Stability |
300(<1000) |
300(<1000) |
300(<1000) |
ppm/℃ |
Nonlinearity |
<0.1 |
<0.5 |
<0.6 |
%FS(Max) |
|
<0.02 |
<0.09 |
<0.27 |
g(Max) |
Bandwidth(4) |
1~≥400 |
1~≥400 |
1~≥400 |
Hz |
Resonance Frequency |
1.6 |
6.7 |
6.7 |
kHz |
Operating temperature |
-40~+85 Cel. degree |
Reliability |
MIL-HDBK-217, Class 2 |
Shock Resistance |
100g @11ms,3Times/Axis (half sinusoid) |
Recovery Time |
<1ms(100g,1/2 sin 1ms, impact in 1 shaft |
Vibration |
20g rms, 20~2000Hz(Random noise, o,p, l each shaft effect 30 min) |
LCC Sealed |
Meet MIL-STD-833-E |
Input(VDD_VSS) |
9-36VCD |
Output current range |
4-20mA@12VDC Input Voltage(@FS) |
Opeating current consumption |
<3mA@ 12 VDC no load |
Output resistance/load |
Maximum 1kΩ@24V power |
Weight |
100g |
Size |
L47*47*38 |