Description:  ACCE-10090 voltage type accelerometer sensor series products is  adopted the Switzerland patented technology to produce for using widely, suitable for vibration testing, impact testing and more fields. This series products with firm structure,low power consumption, excellent deviation stability .etc characteristics to guarantee the reliability of outstanding output . is a monocrystalline silicon capacitive sensor, composed by a silicon chip of micro-mechanical treatment, low power ASIC for the signal adjustment, a microprocessor for storing compensation value and a temperature sensor. The product with low power consumption, after calibration, firm structure, stable output . New electronic configuration reset to provide a solid-state power, to provide comprehensive protection for overcurrent. Scale factor in the full range of long-term stability and the deviation is typically less than 0.1%.

 

Features
-----Three axis measurement optional (X,Y,Z)          
-----Output signal:0-5V
-----Voltage supply:9-36V                           
-----Shock resistance:2000G    
-----Measuring range optional:±01G;±02G;±04G;±08G;±16G;±32G;±40G
-----Excellent deviation stability 
-----Good environment performance shock,vibration and temperature)
-----Size:L47×W47×H38mm                         
-----Weight:100g
-----Working temperature:-40°C to +85°C                 
-----Storage temperature:-55°C to +100°C
 
Application
-----Crash records, fatigue monitoring and forecasting
-----Traffic system monitoring, the roadbed analysis and high-speed railway fault detection
-----Military and civilian flight simulator       
-----The shipboard satellite tracking system
-----Low frequency vibration and automatic monitoring

 

----Connectors: Waterpooof air-plug

----Prectection: IP67

----Enclosure material: Aluminum Oxide

----Installation: 2XM4screws or M15*1.5 bottom screws installation.

Part No:	ACCE-10090-02	ACCE-10090-8	ACCE-10090-40	Unit
Range	+/-2	+/-8	+/-40	g
Deviation Calibration	<10	<50	<150	mg
48h deviation Stability	0.5	<1	<2	mg typecial value
Measure Axis	X, Y, Z	X, Y, Z	X, Y, Z
Annual deviation	1.5(<5)	7.5(<25)	22(<75)	mg
Power on/off repeatability	<2	<10	<20	mg(MX)
Scale Factor Tem. coefficient	100	100	100	ppm/ Cel. degree
	-50/250	-50/250	-50/250	Min/Max
Resolution/threshold(@1Hz)	<1	<5	<15	mg(max)
Nonlinearity	<0.1	<0.5	<0.6	%FS(Max)
	<0.02	<0.09	<0.27	g(Max)
Bandwidth(4)	1~≥400	1~≥400	1~≥400	Hz
Resonance Frequency	1.6	6.7	6.7	kHz
Operating temperature	-40~+85 Cel. degree
Reliability	MIL-HDBK-217, Class 2
Shock Resistance	100g @11ms,3Times/Axis (half sinusoid)
Recovery Time	<1ms(100g,1/2 sin 1ms, impact in 1 shaft
Vibration	20g rms, 20~2000Hz(Random noise, o,p, l each shaft effect 30 min)
LCC Sealed	Meet MIL-STD-833-E
Input(VDD_VSS)	9-36VCD
Output current range	0-5VDC@2VDC Input Voltage
Opeating current consumption	<3mA@ 12 VDC no load
Output resistance/load	Maximum 1kΩ@24V power
Weight	100g
Size	L50*50*38