Part No: INGA-11022

         Infrared syngas analyzer Based on the NDIR and Thermal Conductivity Detector and can be used for measurement of the concentration of up to 6 gases such as CO ,CO_{2 ,}CH_{4 ,}C_nH_{m ,}H₂ and O_{2 ,}also calculated heating value(caloric value )automatically.

 

        Coal or biomass gasification, coal chemical process, heating treatment, steel making process such as blast furnace, Converter, Coking, Direct Iron Ore Smelting Reduction Process

 

1.  Adopt international advanced NDIR and TCD gas analysis technology.

2.  Can measure the concentration of CO ,CO2 ,CH4 ,H2 ,O2 ,CnHm simultaneously.

3.  Automatically calculated heating value, the unit can be switch on/off between Kcal/m³ and Mj/m³.

4.  CnHm gas has no interference with CH4 measuring result.

5.  H2 reading is compensated for the interference effects of the CO ,CO2 ,CH4 measured.

6.  RS-232 digital output and 4-20mA analog output interface.

7.  Auto zeroing function.

 Note: Measurement range can be customized by the requirement.

Measure Gas	Measure Method	Measure Range	Resolution	Precision	Error
CO	NDIR	25%	0. 01%	≤2% FS	≤2%
CO2	NDIR	50%	0. 01%	≤2% FS	≤2%
CH4	NDIR	10%	0.01%	≤2% FS	≤2%
H2	TCD	10%	0.0 1%	≤3% FS	≤2%
O2	ECD	25%	0.01%	≤3% FS	≤2%

 

 

Gas flow 0.7 ～ 1.2 L/min Pressure of gas inlet <1Bar Sampling gas requirement Remove water vapor, dust(<1um) and oil etc. Response Time <15s (NDIR) Warm-up time 15min Communication port RS232(optional) Output 4~20 mA（according to the requirement）

Work temperature 0~50 degree Relative humidity 5~85% Ambient air pressure 86-108kPa Power supply 220V±44V AC 50Hz±1Hz Dimension 483mm×373mm×140mm（W×L×H） Weight 12kg