1. Universal welding gauge is multinational one to measure the width, angle, thickness,

2. Bridge cam one to Angle of preparation: 0° to 60°,Angle of preparation from 0 to 60 deg,Excess weld metal (capping size),Depth of undercut,Depth of pitting Fillet weld throat size,Fillet leg length,Crown Height,Root Face & Root Gap.

3. HI-LO Measure interior misalignment Loosen the locking screw. Insert the gauge into the pipe by turing the gauge sideways and pushing the top part of the gage through thefit-up gap. 1. twist the gage 90 degree, slide the gage body up until it is snug against the outer pipe wall, This exclusive feature assures you gauge is square and reading displayed is correct. Place your fingers on top of the gage feet and pull down until the internal alignment stops are snug against the IDs of the hutting pipes, tighen the locking srew. Twist the gage 90 degree and remove from the pipe. Read the misalignment on the vertical scale in 32nds(mm)

4. Fillet Welding Gauge (Metric) with a pivoting blade for easy measuring of eleven most specified fillet dimensions. Measures concave or convex seams. Stainless steel blades, etched increments. 1/8 in. thru 1 in. and metric equivalents. Fits in 4-1/2 in. x 2 in. case

5. V-wac Used for Checks undercut,Checks Crown height,Checks Porosity,Checks Pits